Black Ice Audio Fusion F22 Integrated Amplifier


Arizona Sales Only

The Black Ice Audio F11 and F22  integrated amps display an aesthetic that melds classic tube-and-transformer with more modern style and conveniences, such as touch-sensor buttons on the front panel, a headphone jack right off the output transformer, and an included tube-biasing tool that’s easier to use than the typical tiny screwdriver. Both amps were created around Jim Fosgate’s Odyssey dual-phase V drive circuit, a fully balanced differential push-pull design. The F11 delivers 18.3Wpc and uses new-reissue 7189 output tubes, said to allow more voltage to be applied for more sonic sparkle, weight, and punch. The F22 uses EL34s for output and 12AX7s for the preamp stage and features a Hafler hybrid design on the output transformers that’s been tweaked to enable these amps to drive relatively lower-efficiency speakers.

A higher wattage version utilizing 6550 outputs is also available.

Remote control.

Available in black or silver.

Out of stock

Maximum Power Output:   75 W per channel at 8 ohms,  1KHz with 6550 Tubes   /   65 W per channel at 8 ohms,  1KHz with EL34 Tubes
Rated Output Power:   60 W per ch @ 8 ohms, 25Hz to 60KHz with 6550 Tubes  /  50 W per ch @ 8 ohms, 28Hz to 72KHz with EL34 Tubes
Frequency Response:    (at 1 watt into 8 ohms) 8Hz to 130KHz   + 1dB
Bandwidth:    15Hz to 80KHz + 3dB; 0dB 60 W 1KHz
Distortion THD:  Less than 1% at 20 V output, 28Hz to 15KHz
Circuit Type:  Fully Balanced differential push pull
Input Impedance: 100Kohms
Input Sensitivity:  1V at 1KHz for 50/60 watt output
Output Impedance:  4 ohms and 8 ohms
Negative Feedback:  Less than 4.5 dB
Noise and Hum:  95dB below rated output
Tube Complement:  4 pcs. EL34 or 6550 power output; 4 pcs. 12AX7A/ECC83
Power Requirements: 110V-120 VAC 60Hz 6 watts-standby, 450 watts maximum (220 VAC 50Hz option)
Dimensions: 14.5 inches (37cm) wide by 11.5 inches (29cm) deep by 7.5 inches (19 cm) high
Weight: 32 pounds (14.5 Kg) net, approximately 43 pounds (19.5 Kg) packaged
Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Black Ice Audio Tubes.
Bias Settings: 40 milliamps + 4 mA for EL 34s, 50 milliamps + 5 mA for 6550s
Fuse: 110 – 120 VAC, 6.3 Amp slo Blo; 200 – 240 VAC, 3.15 Amp slo Blo     Size 5mm X 20mm

Black Ice Audio is the new name for Jolida.

With final assembly performed in the US and critical parts like transformers sourced from Germany, tube manufacturer Black Ice Audio, formerly Jolida, has garnered an enviable reputation for high-performance products at real-world prices.

The new Black Ice products were designed by industry legend Jim Fosgate.